HP0-144 exam dumps

If you are sure that you want to pass HP certification HP0-144 exam, then your selecting to purchase the training materials of ITCertKing is very cost-effective. Because this is a small investment in exchange for a great harvest. Using ITCertKing's test questions and exercises can ensure you pass HP certification HP0-144 exam. ITCertKing is a website which have very high reputation and specifically provide simulation questions, practice questions and answers for IT professionals to participate in the HP certification HP0-144 exam.

If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the HP HP0-144 exam. You can use ITCertKing's HP HP0-144 exam training materials. The training materials of ITCertKing are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.

HP HP0-144 exam is a Technical Specialist exam. HP HP0-144 exam can help and promote IT staff have a good career. With a good career, and of course you can create a steady stream of corporate and national interests, so as to promote the development of the national economy. If all of the IT staff can do like this the state will become stronger. ITCertKing HP HP0-144 exam training materials can help IT personnel to achieve this purpose. We guarantee you 100% to pass the exam. Make the tough decision to choose our ITCertKing HP HP0-144 exam training materials please.

HP HP0-144 is a certification exam to test IT professional knowledge. ITCertKing is a website which can help you quickly pass the HP certification HP0-144 exams. Before the exam, you use pertinence training and test exercises and answers that we provide, and in a short time you'll have a lot of harvest.

From ITCertKing website you can free download part of ITCertKing's latest HP certification HP0-144 exam practice questions and answers as a free try, and it will not let you down. ITCertKing latest HP certification HP0-144 exam practice questions and answers and real exam questions is very close. You may have also seen on other sites related training materials, but will find their Source ITCertKing of you carefully compare. The ITCertKing provide more comprehensive information, including the current exam questions, with their wealth of experience and knowledge by ITCertKing team of experts to come up against HP certification HP0-144 exam.

About the HP0-144 exam certification, reliability can not be ignored. HP0-144 exam training materials of ITCertKing are specially designed. It can maximize the efficiency of your work. We are the best worldwide materials provider about this exam.

Exam Code: HP0-144
Exam Name: HP (ProCurve Secure WAN)
One year free update, No help, Full refund!
Total Q&A: 111 Questions and Answers
Last Update: 2013-12-23

HP0-144 Free Demo Download: http://www.itcertking.com/HP0-144_exam.html

NO.1 Which function does the virtual path identifier/virtual channel identifier (VPI/VCI) perform?
A. It identifies the endpoint for an Asynchronous Transfer Mode (ATM) connection.
B. It identifies the tunnel endpoint for virtual private network (VPN) peers.
C. It identifies the permanent virtual circuit (PVC) in a Frame Relay network.
D. It defines each peer in a Point-to-Point Protocol (PPP) connection, if authentication is configured.
Answer: A

HP   HP0-144   HP0-144 exam prep   HP0-144 test questions   HP0-144

NO.2 Before the ProCurve Secure Router and the DSL Access Multiplexer (DSLAM) exchange
Asynchronous Transfer Mode (ATM) cells, they utilize physical-layer signaling to establish an Asymmetric
DSL (ADSL) connection. Which monitor evaluates the signal-to-noise ratio (SNR) margin while the router
and the DSLAM establish the physical ADSL connection?
A. ADSL monitor
B. showtime monitor
C. phase 1 monitor
D. training monitor
Answer: D

HP original questions   HP0-144   HP0-144 practice test   HP0-144   HP0-144

NO.3 Which Quality of Service (QoS) features does the ProCurve Secure Router support? Select TWO.
A. custom queuing
B. low latency queuing (LLQ)
C. weighted fair queuing (WFQ)
D. generic traffic shaping (GTS)
E. Frame Relay traffic shaping (FRTS)
Answer: BC

HP   HP0-144 test questions   HP0-144 exam dumps   HP0-144 pdf

NO.4 Which interfaces can be configured as DHCP clients? Select TWO.
A. BRI interface
B. ADSL interface
C. ATM subinterface
D. Ethernet interface
E. Frame Relay interface
F. DSX-1 or G. 703 interface
Answer: CD

HP certification   HP0-144 exam dumps   HP0-144 exam prep   HP0-144   HP0-144

NO.5 You have configured an Integrated Services Digital Network (ISDN) backup for your organization's
Frame Relay connection. When this connection goes down, which virtual interface could establish and
maintain the backup connection?
A. a backup Asynchronous Transfer Mode (ATM) interface
B. a backup Frame Relay interface
C. a backup Point-to-Point Protocol (PPP) interface
D. a backup BRI ISDN interface
Answer: C

HP   HP0-144   HP0-144   HP0-144

NO.6 How can you configure the ProCurve Secure Router so that a backup module does not establish a
backup connection with an unauthenticated peer?
A. Set the backup call mode so that the module cannot answer calls until the primary connection goes
down.
B. Configure PAP or CHAP on the backup interface.
C. Add an authentication, authorization, and accounting (AAA) list to the backup interface.
D. Add authenticated routers' hostnames to the global configuration mode database.
Answer: B

HP original questions   HP0-144   HP0-144   HP0-144 test answers

NO.7 The Asymmetric Digital Subscriber Line (ADSL) keeps going into training mode. What is causing this
problem?
A. The signaling type configured for the router does not match the signaling type used by the service
provider.
B. The encapsulation type configured for the router does not match the type used by the service provider.
C. The signal-to-noise (SNR) margin configured for the router is too high.
D. The ADSL interface has not been assigned an IP address.
Answer: C

HP practice test   HP0-144 answers real questions   HP0-144   HP0-144 test answers   HP0-144

NO.8 The status of the BRI interface is "connected." What does a connected status indicate?
A. The backup module is installed in the ProCurve Secure Router and is ready to be configured.
B. The BRI interface has been assigned to a primary connection.
C. The BRI interface is ready to provide a backup connection.
D. The BRI interface is currently providing a backup connection.
Answer: D

HP braindump   HP0-144 test questions   HP0-144 test questions

NO.9 When you are configuring an Asymmetric Digital Subscriber Line (ADSL), what is the purpose of
training mode?
A. ADSL is dependent upon line quality; ADSL devices must determine the best way to use the line.
B. ADSL devices always negotiate the signaling standard used, based on the type of DSLAM used by the
public carrier.
C. The ADSL device and the DSLAM must identify the fastest switched virtual circuit (SVC) available.
D. The training mode is essentially a testing phase to determine if the ADSL module itself is working
correctly.
Answer: A

HP test   HP0-144 test   HP0-144   HP0-144 questions

NO.10 What is a disadvantage of dynamic routing?
A. Dynamic routing does not allow you to restrict which networks are included in routing tables.
B. Dynamic routing can consume bandwidth and CPU processes on the router.
C. Dynamic routing is less scalable than static routing.
D. Dynamic routing makes adding new networks to a WAN difficult.
Answer: B

HP   HP0-144 test   HP0-144 dumps   HP0-144 certification training

NO.11 What must you do to configure Point-to-Point Protocol over Ethernet (PPPoE) for an Asymmetric
Digital Subscriber Line (ADSL)?
A. Configure and bind the ATM interface to the ADSL interface; then bind the ATM subinterface to a PPP
interface.
B. Configure a PPP interface; then bind the PPP interface to the ADSL interface.
C. Configure both an ATM interface and a PPP interface, and bind the ADSL interface to both virtual
interfaces.
D. Configure a PPPoE interface and bind it directly to the ADSL interface.
Answer: A

HP exam dumps   HP0-144 test questions   HP0-144

NO.12 What determines the number of Asynchronous Transfer Mode (ATM) subinterfaces you configure for
an Asymmetric Digital Subscriber Line (ADSL) connection?
A. the number of LANs you want to connect to the Internet
B. the number of access control lists (ACLs) you want to apply to the ADSL interface
C. the amount of bandwidth you want to reserve for upstream and downstream transmissions
D. the number of virtual circuits you want to establish
Answer: D

HP   HP0-144   HP0-144   HP0-144

NO.13 Which command allows you to use enable mode commands from any mode except basic mode?
A. the get command
B. the go command
C. the nomode command
D. the do command
Answer: D

HP   HP0-144   HP0-144 answers real questions   HP0-144   HP0-144 practice test   HP0-144

NO.14 Which type of firewall monitors traffic on several layers of the Open Systems Interconnection (OSI)
model?
A. packet-filtering firewall
B. circuit-level gateway
C. application-level gateway
D. stateful-inspection firewall
Answer: D

HP certification training   HP0-144 exam dumps   HP0-144   HP0-144   HP0-144 dumps   HP0-144

NO.15 How many access control lists (ACLs) can you apply directly to one interface?
A. 1
B. 2
C. 5
D. unlimited number
Answer: B

HP   HP0-144   HP0-144   HP0-144 dumps

NO.16 Which type of connection may be used for the backup modules on the ProCurve Secure Router?
A. Asymmetric Digital Subscriber Line (ADSL)2+, Annex A or Annex B
B. T1 or E1 connections
C. Integrated Services Digital Network (ISDN) connection
D. Asynchronous Transfer Mode (ATM) connection
Answer: C

HP   HP0-144 exam dumps   HP0-144 original questions   HP0-144 exam simulations

NO.17 Which tasks can you use CompactFlash to complete? Select TWO.
A. Configure routers at remote sites.
B. Increase RAM on the router by configuring virtual memory.
C. Enter bootstrap mode.
D. Back up configuration files.
E. Enable IPSec security.
F. Store and view the Secure Router OS in an uncompressed format.
Answer: AD

HP braindump   HP0-144 answers real questions   HP0-144 answers real questions   HP0-144 certification training   HP0-144

NO.18 Which steps must you complete to enable access to the ProCurve Secure Router's web interface?
Select TWO.
A. Enable the ftp server.
B. Enable the http server.
C. Configure a Telnet password.
D. Configure an enable mode password.
E. Configure a username and password.
F. Configure an ACL permitting FTP traffic.
Answer: BE

HP braindump   HP0-144 pdf   HP0-144 questions   HP0-144

NO.19 Which feature does the ProCurve Secure Router 7203dl provide that the ProCurve Secure Router
7102dl does not?
A. built-in encryption module
B. support for redundant power source (RPS)
C. one additional Ethernet port
D. support for up to 6 ADSL lines
Answer: B

HP   HP0-144 answers real questions   HP0-144 practice test

NO.20 Click the Exhibit button.
You want your ProCurve Secure Router to act as a gateway device for any remote VPN client who
initiates IKE in its most secure mode. Which policy shown contains the correct configurations for this
use?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
Answer: C

HP study guide   HP0-144   HP0-144   HP0-144

ITCertKing offer the latest 642-457 exam material and high-quality NS0-155 pdf questions & answers. Our MB7-702 VCE testing engine and 700-101 study guide can help you pass the real exam. High-quality 70-481 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP0-144_exam.html